Tap Timer may not be scheduled as desired

1. Ensure your timer clock is set to the current date and time, ensuring AM/PM is also correct
2. Ensure your WATERING DAYS, START TIME and RUN TIME are all set correctly as desired
3. Ensure your schedule is assigned to your desired watering ZONE correctly
4. Ensure your tap timer is set to AUTO once all schedules are set
   

Water pressure may be too high

1. Check the flow rate and pressure of your tap:
   • Tap timers need to operate within a particular range. Refer to the product details of your tap timer to ensure it is operating within the correct range
   • To check the flow rate of your tap, you can perform a bucket test by following these instructions
2. Try adding a Pressure Reducer (VPR200) to your system, between your Tap Timer and the tap

Tap Timer may need to be closed manually

1. Manually close the outlets by following these instructions:
   1. Set the tap timer to AUTO
   2. Press MANUAL
   3. Press +to set a manual run time to 1 minute and let this duration lapse
      • This will close the outlet
      • If you need to close additional outlets, press ZONE to select the correct outlet that is running and follow the above steps again