The fuse may be blown in your Irrigation Controller

• Check the fuse in your Irrigation Controller
  • If the Solenoid Valves have been wired incorrectly, it will cause a short on the controller and blow the fuse

Solenoid Valves may be wired incorrectly

• Ensure each Solenoid Valve has two wires connected to the coil:
  • One should lead to the COMMON terminal on your Irrigation Controller
  • The other should lead to the desired STATION terminal on your Irrigation Controller

Flow control stem on the Solenoid Valve may not be open

• Check the flow control stem on your Solenoid Valve is fully open
  • If this isn't open it will reduce the amount of flow coming through the valve