Adding fertiliser, herbicides and pesticides to your lawn or garden has never been easier. The new Holman self-pressurised garden sprayer allows you to maintain your garden without any manual pumping!
Available in 3L and 5L options depending on your sized garden, the EzySpray™ is filled directly from your garden hose!
Why is there a schrader valve installed on the unit - do I need a bike pump to use the EzySpray™?
Your EzySpray™ will come already pressurised and should not require any pumping to begin spraying. We have included a shrader valve to allow de-pressurisation of the unit - which can easily be re-pressurised with a few pumps of a standard bike pump. Your EzySpray™ will maintain its pressure under normal conditions and should not need regular re-pressurisation.
Please note: When re-pressurising your EzySpray™ make sure not to exceed 1 bar of air pressure by checking the pressure gauge as you pump
Will the EzySpray™ completely empty the tank of water?
Your EzySpray™ is designed to empty to the last drop - providing it is pressurised at 1 bar. There should be no residual water left inside the unit after spraying
How do I add fertiliser or herbicide to the EzySpray™?
Follow the dosage instructions of your chosen additive for the correct dilution amount, these will vary depending on the product you are using. Always ensure the EzpSpray™ is empty of water before introducing additives to the tank. Remove the grab handle from the top of the EzySpray™ and pour the additive into the chamber. Only fill the additive cup 70 - 80% full. If more than 80mL of additive is required, the plunger can be removed and more liquid added. After the additive is added to the chamber, replace the grab handle and steadily push down. This will push the additive into the internal bag of the EzySpray™. Once all additives are inside the unit, you can then fill the EzySpray™ with water straight from your garden hose and begin spraying
Click Here for a video demonstration of adding fertiliser to the EzySpray™
What if I overfill the EzySpray™ from the tap?
We have included a release valve which is designed to prevent the EzySpray™ from overfilling if accidentally left too long on the tap, and to protect it from a high pressure water source. If you overfill the unit or exceed the pressure allowance, the pressure release valve will automatically let out the excess water
What if I have low water pressure from my garden tap?
As the EzySpray™ requires pressure from your garden tap to completely fill the unit, low pressure water sources may struggle to completely fill the EzySpray™. It is therefore not recommended to attempt filling the EzySpray™ from a rainwater tank. Your ability to completely fill the EzySpray®™ with water depends on the pressure from your garden tap.
What is the minimum garden tap pressure required to fill my EzySpray™?
Your ability to completely fill the EzySpray™ with water depends on the pressure from your garden tap.
- The 3L EzySpray™ requires a minimum pressure of 300kPa
- 5L EzySpray™ requires a minimum pressure of 350kPa
When I disconnect the garden hose from the EzySpray™ after filling it sprays excess water - how can I prevent this?
We have included an inlet valve connector to help prevent excess water from releasing from the hose after disconnecting the EzySpray™. The inlet valve connector should attach between your garden hose quick connector and the EzySpray™. Ensure the valve position is open when filling, and close the valve after the EzySpray™ has been filled. When the valve is closed, it will prevent any excess water in the hose from spraying out after disconnecting from the EzySpray™
Should you have further questions please call the Holman Customer Support Team on 1300 716 188 - they're available from Monday to Friday between the hours of 7.30am and 3.30pm (Perth local time)
Comments
0 comments
Please sign in to leave a comment.