Pressure reducers are designed to regulate water flow for irrigation systems. If you're experiencing leaking from the bleed hole on a black pressure reducer, here's what you need to know.
🔍 Why Is There a Hole in the Pressure Reducer?
The small bleed hole on the side of the pressure reducer allows water to escape temporarily while the line builds up to the correct operating pressure. This is a normal part of its function.
- Once the line reaches full pressure, the valve automatically shuts off the bleed.
- If the hole continues to leak, it means:
- The line is not reaching full pressure, or
- The valve is faulty and may need replacement.
⚠️ Common Causes of Continuous Bleeding
- Insufficient Water Pressure
- Household taps usually have good pressure, but if the supply is weak, the reducer may not seal properly.
- Incorrect Setup
- These reducers are sold as part of a set with an in-line filter, intended for use with non-potable water sources like ponds or creeks.
- The filter can restrict flow, preventing the line from reaching full pressure and causing the bleed hole to leak continuously.
- Using the Filter on Household Taps
- The filter is not recommended for use with household taps that already supply clean, pressurized water.
- For garden irrigation (drip or micro-spray), the reducer can be used on its own without the filter.
✅ Recommended Setup for Household Use
- Use the pressure reducer only, without the filter, for garden irrigation systems.
- Ensure the tap provides adequate pressure.
- If leaking persists, consider replacing the reducer or checking for blockages in the line.
📞 Need Help?
If you're still having issues, please contact our support team:
1300 716 188
We’re happy to assist with troubleshooting or product recommendations.