Your garden will require less watering during the Winter months, so you should adjust your WX Tap Timer watering schedule accordingly.
In most cases, you should be able to stop irrigation from your tap completely and let the rain water your garden for you.
Caution: If you experience cold winter mornings (at/below 4 degrees) then it's recommended to remove the timer from the tap and store it away for the colder months, this is most important if your area is prone to frost.
We recommend that you first remove the WX1 Tap Timer from the Holman Home app, before removing the batteries (allow the timer to dry completely before removing batteries). To do this - simply tap the WX1 Tap Timer in Holman Home, then tap the pencil at the top right of the screen, at the bottom of the next page select 'remove device' and disconnect the timer.
If you wish to continue to use your Smart Moisture Sensor during Winter, you can simply remove the WX1 Tap Timer from the tap with batteries installed, dry it completely and then store it in a safe location within the frequency range of the Smart Moisture Sensor (we would recommend 15-20m).
You will be able to continue monitoring your garden bed temperature and moisture level through the WX1 Tap Timer app interface in Holman Home.
Article verified: WX1TT, WX1TH, WX1, WX2TT, WX2TH, WX2, WXMS