1. Remove WX1 Tap Timer from the Holman Home app:
- Remove the Tap Timer (go into the WX1): Tap the pencil Icon (top right of the page) -> Remove Device -> Disconnect and wipe data
Please note: If you want to reset everything – i.e Tap Timer and Hub, remove the Socket prior to removing the Hub
2. Remove Wi-Fi Socket and Wi-Fi Hub from the Holman Home app:
- Remove the Socket (go into the Wi-Fi Socket): Tap Pencil Icon (top right of the page) -> Remove Device -> Disconnect and wipe data
- Remove the Hub (go into the black home page of the Wi-Fi Hub): Tap Pencil Icon (top right of the page)-> Remove Device -> Disconnect and wipe data
3. Hardware Reset the Wi-Fi Hub
- Remove the Wi-Fi Hub from mains power and wait 5 minutes to ensure all capacitors are discharged
- Press and hold the button, then plug the Wi-Fi Hub back into mains power at the same time
- Continue to hold the button until the LED shows a long solid green followed by a quick flashing green, then release the button
- The Wi-Fi Hub is now ready to add via EZ Mode
4. On the Holman Home app add the Wi-Fi Hub
5. Hardware Reset the WX1 Tap Timer
- On the WX1, remove battery holder and wait 5 minutes to ensure all capacitors are discharged
- While pressing the button, insert and lock in the battery holder
- As you hold the button, the LED will flash red/white 3 times, pause and then flash red three times. Now there's a 7-10 second pause and after this, the button will start flashing white/fast - you can then release the button
- The WX1 Tap Timer is now ready to add
6. Add WX1 Tap Timer to the Holman Home app
The WX1 Tap Timer is now totally reset – all settings are back to the factory defaults. The NEXT WATERING should show as 00/00/2000 12:00AM and all Starts are disabled.
Article verified: WX1TH, WX2TH, WX1, WX2