Installation of our Retractable Hose Reels can easily be done yourself with a few basic tools. Here we show you in a few steps how you can upgrade your garden!

The auto-rewind mechanism in this hose reel helps with easy storage after the hose is pulled out and prevents any twist or kinks. We've also included a hose layering mechanism for perfect retraction every time.

We show you how to mount a 10m Retractable Hose Reel onto a brick wall in this video:

Bonnie from The Garden Gurus demonstrates how easy it is to install our Retractable Hose Reel. Completed in under 10 minutes with a few basic tools, this DIY installation is simple enough for anyone to do.

Drill Bit Sizing

The drill bit suggested is a 10mm bit, this is because an 11mm masonry bit is a very uncommon size and often stores do not stock them.
Better to start too small than too big!
 
The bit must be drilled into the wall to the full length.
Some bricks are solid, some are not, so go the length of the thread on the bit.
If the plug does not slip into the hole, once again, stick the drill bit back into the hole and make circular motions to enlarge the hole.
A hammer drill must be used.

 

Article verified: 1110H, 1120H, 1130H, CH1120, CH1130, CD1120C, 1125H, 1215H, 1225H