Please note: Your iGardener app looks will vary from the below, however the setting function is the same

1. Tap the SCENE button below the scene number you wish to add a timer to. For example, if you wish to add a timer to Scene 1, be sure to tap the button that says SCENE 1 to access the options as shown
   
2. Set the desired time by scrolling the START TIME and STOP TIME as shown
   
   
   
3. Once the times are set, tap DONE
   
   
   
4. To activate the timer, disable the scene by tapping the large Off button. The scene will turn back on at the time that has been set
   
   
   
5. If you wish to use your garden lights before the timer is triggered, use another scene so as not to disable the timer you have set
   

Please note: Regarding the Schedule

• If you access the app while a schedule is operating, then you will override and take control of the lights, and the schedule will be automatically stopped and not function again until the next day it is scheduled to start
• If you are setting up a Start Time before the actual time it will not work until the next day. For example, if it is 7pm and you set a Start Time of 6pm and Stop Time of 8pm it will not work until the next day at 6pm.
• If you setup the schedule for all scenes to start at the same time, then the first scene fader settings will be the only ones to display at the appropriate start time
• If the all the lights are off, then the schedule will start the lights as per the scene fader settings and then at the stop time the lights will all turn off
• If some of the lights are on, then the schedule will start the lights as per the scene fader settings and then at the stop time the lights will return to their previous settings
• If a scene has no enabled Stop Time, then the lights will NEVER turn off unless you do so manually

When you have finished tap Done (located at the top of the screen). If you tap Cancel anything you have done will be lost.

Article verified:  CLBRGB60, CLBW60