💧 Timer Troubleshooting Guide
🧪 Testing the Timer
Step 1: Remove & Reset
- 💦 Remove the timer from the tap and shake out any excess water.
- 🔄 Reattach the timer to the tap (but not to the irrigation line yet).
Step 2: Manual Test (Tap OFF)
- 🔘 Set the dial to MANUAL, press ENTER.
- ⏳ Wait a few moments — the display should flash “watering”.
- ❌ Turn it off by dialing to OFF.
- 🔁 Repeat this a few times, allowing a short pause between ON and OFF.
Step 3: Manual Test (Tap ON)
- 🚰 Turn the tap ON.
- 🔘 Run the timer again in MANUAL mode.
- ❌ Tap OFF after a short run.
- ✅ If the solenoid responds correctly, it’s working!
🛠️ Final Recommendation
- 🧩 If the test works, install a 300KPA pressure reducer before the timer to prevent future issues.
- ❗ If the timer still doesn’t work, it may be faulty and require replacement.
📌 Additional Notes on Installation
- 🏷️ The name says it all: 2 Dial Tap Timer — it’s designed to be mounted vertically on a garden tap.
- 📸 Every product image shows the timer in a vertical position. Mounting it horizontally may cause it to malfunction.
- 📘 The manual includes a universal tap adaptor for both 20mm and 25mm BSP taps (standard in Australia).
- 🧾 It clearly states the correct orientation and fitting method to ensure optimal performance.
❓ Frequently Asked Questions (FAQs)
Q: Why isn’t my timer turning on?
A: It could be due to low water pressure or back pressure from your irrigation setup. Try the test steps above to check.
Q: Can I use this timer with a tank or pressure pump?
A: No, it’s designed for regular household tap pressure only.
Q: Do I need a pressure reducer?
A: Yes, especially for short-run drip or micro-spray systems. It prevents back pressure that can stop the solenoid from working.
Q: What does it mean when the screen flashes “watering”?
A: That means the timer is running correctly in manual mode.
Q: What if I don’t have a receipt for a faulty timer?
A: No problem! Just send us the 4-digit batch number from the bottom of the timer. We can help with a warranty claim (valid for 12 months).
Q: How long is the warranty?
A: The timer comes with a 12-month warranty from the date of purchase.