You can manually water a specific zone at any time using the Quick Dial Timer. Follow the simple steps below.

Starting Manual Watering

1. Press the Orange ON/OFF Button Once
   This opens the Manual Watering screen on the display.
2. Select the Zone
   Turn (roll) the orange dial to scroll through the available zones.
   Stop when the zone you want to water is shown on the screen.
3. Confirm the Zone
   Press the orange dial down once.
   • The selected zone will now appear below the line on the screen
   • The watering icon will appear, showing that watering has started

4. Set the Watering Time

   • The default watering time is 5 minutes
   • Immediately after the zone starts, you have a brief moment to turn the orange dial
   • Turn the dial to increase or decrease the watering time as desired

   ✅ Whatever time is shown on the screen is automatically set—no extra button press is needed.

Stopping Manual Watering

To stop watering at any time:

• Press the orange ON/OFF button once
  Manual watering will stop immediately.

Helpful Tips

• Manual watering does not affect your programmed schedules
• If no changes are made, the zone will automatically run for the default 5 minutes
• Act quickly when adjusting the run time, as the adjustment window is brief

If you’d like help with scheduled programs or other features, feel free to explore our support articles or contact our team.