If your tap timer has suffered from battery corrosion or water ingress, and the battery snap connector is damaged, it can be replaced easily with a spare part available from most electronics retailers.

🛠️ What You’ll Need

• Replacement 9V battery snap connector
  (Available from electronics stores like JayCar, Altronics, or online retailers)
• Wire cutters or scissors
• Electrical tape
• Fresh 9V battery

🔧 Replacement Instructions

1. Remove the damaged battery snap connector.
   Use wire cutters to snip the wires, leaving enough length to attach the new connector.
2. Attach the new connector.
   • Connect the red wire to red
   • Connect the black wire to black
3. Seal the connection.
   Wrap the joined wires securely with electrical tape to protect against moisture and ensure a stable connection.
4. Insert a fresh 9V battery.
   Your timer should now be ready to use again.

❗ Need Help?

If you're unsure or need assistance, feel free to contact our support team:

📞 1300 716 188

We’re happy to help!